Sony MDS-JB920 Service Manual page 35

Pin No. Pin Name
91 SRDR
92 SFDR
93 SPRD
94 SPFD
95
FGIN
96
TEST1
97
TEST2
98
TEST3
99 DVSS
100 EFMO
* I (S) stands for schmitt input, I (A) for analog input, O (3) for 3-state output, and O (A) for analog output in the column I/O.
I/O
O Sled servo drive PWM signal (–) output to the BH6511FS (IC152)
O Sled servo drive PWM signal (+) output to the BH6511FS (IC152)
O Spindle servo drive PWM signal (–) output to the BH6511FS (IC152)
O Spindle servo drive PWM signal (+) output to the BH6511FS (IC152)
I (S)
I
Input terminal for the test (fixed at "L")
I
I
— Ground terminal (digital system)
O EFM signal output terminal when recording mode
Function
– 35 –