Sony MDS-JB920 Service Manual page 16

MECHANISM SECTION (MDM-5A)
4 Remove the mechanism deck
(MDM-5A) to direction of the arrow.
SLIDER (CAM)
2 bracket (Guide L)
1 two screws (P2.6x6)
3 leaf spring
6 slider (Cam)
3 four step screws
(BVTTWH M3)
1 connector
• Note for Installation of Slider A (Cam)
Set the shaft of Cam gear to
be at the position in the figure.
5 bracket (Guide R)
– 16 –
(CN401)
2 wire (flat type) (21 core) (MAIN-BD)
(CN402)
2 wire (flat type) (23 core)
(CN400)
Set the shaft of Lever (O/C) to
be at the position in the figure.
4 two screws (P2.6x6)