Sony MDS-JB920 Service Manual page 2

General
Power requirements
Where purchased
Continental Europe and UK
U.S.A and Canada
Power consumption 18 W
Dimensions (approx.) (w/h/d) incl.projecting parts and controls
430 × 107.5 × 287 mm
(17 × 4
Mass (approx.) 4.8 kg (10 lb 9 oz)
The self-diagnosis function consists of error codes for customers which are displayed automatically when errors occur, and error codes
which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the
following box in the instruction manual. For details on how to check error codes during servicing, refer to the following "Procedure for
using the Self-Diagnosis Function (Error History Display Mode)".
Procedure for using the Self-Diagnosis Function (Error History Display Mode).
Note: Perform the self-diagnosis function in the "error history display mode" in the test mode. The following describes the least required procedure. Be
careful not to enter other modes by mistake. If you set other modes accidentally, press the MENU/NO button to exit the mode.
[ AMS ]
1. While pressing the ≠
[ ]
and p button.
[ AMS ]
±
2. Rotate the ≠
[ AMS ]
≠ ±
3. Rotate the
[YES]
4. Pressing the button sets the error history mode and displays "total rec".
5. Select the contents to be displayed or executed using the
[ AMS ]
6. Pressing the ≠
[ AMS ]
≠
7. Pressing the
[MENU/NO]
8. Pressing the
9. To exit the test mode, press the
Power requirements
220 – 230 V AC, 50/60 Hz
120 V AC, 60 Hz
× 11
1 3
/ / in)
4 8
SELF-DIAGNOSIS FUNCTION
[ ]
± knob and p button, connect the power plug to the outlet, and release the
knob and when "[Service]" is displayed, press the
knob and display "ERR DP MODE".
± knob will display or execute the contents selected.
± knob another time returns to step 4.
button displays "ERROR DP MODE" and exits the error history mode.
[REPEAT]
button. The unit sets into the STANDBY state, the disc is ejected, and the test mode ends.
Supplied accessories
Design and specifications are subject to change without notice.
[YES]
[ AMS ]
≠ ± knob.
– 2 –
Audio connecting cords (2)
Optical cable (1)
Remote commander (remote) RM-D17M (1)
R6 (size-AA) batteries (2)
[ AMS ]
≠
button.
± knob