White Balance - Sony Effio E User Manual

3.3 White Balance

White balance can be set to ATW, PUSH, USER1, USER2, ANTI
CR, MANUAL or
ATW (Auto Tracking White balance) and PUSH (Full pull-in) are
continuously monitoring/analyzing the color temperature of the
incoming light and correcting the white balance.
ATW limits the color temperature range at about 2,500˚K~8,500˚K to
reduce the excessive compensation for the big object which has a
single color.
PUSH has no limits between about 1,800˚K~10,500˚K but it may
over-compensate the white balance for the big object which has a
single color.
*In cases where it goes under 2,500˚K such as halogen light, ATW may
stop. If so, PUSH mode is
*In cases if Switch on the camera in an area where
LAMPS are the only source of lights the Picture might be
ATW mode. In these cases
USER1 and USER2 are a fixed white balance which is
user-programmable by R-GAIN and B-GAIN and
the steady light.
ANTI CR (Anti Color Rolling) can reduce color rolling under
the fluorescent light when the camera
without an auto iris lens. (NTSC version only) .
PUSH LOCK.
recommended.
PUSH mode is
Page13of27
SAVE ENERGY
recommended.
useful only for
operates in shutter control
RED in