Sony Effio E User Manual page 21

(built-in osd)

Hide thumbs Also See for Effio E:

Table of Contents

（1） Pulse

Set the pulse switch, the default value: Off.

3.10 NR

In the "noise reduction" menu click "OK" button to enter the

"noise reduction" sub-menu, you can set the corresponding parameters.

Noise reduction is in the case of very low light reduction caused

by low-light point of the picture noise to enhance the signal to noise

ratio (S / N) and image clarity, and the camera in low light conditions

catches clearly sharpness image, the quality can be guaranteed.

NR MODE

Y LEVEL

C LEVEL

RETURN

Set the noise reduction mode, Y / C, Y, C, off four options. Choose

noise reduction corresponds to the modes.

Select Y / C mode, you can adjust the value of brightness and

color in noise reduction between 0-15. The larger the value, the smaller

the noise is.

Select Y mode, you can adjust the Y level value decomposition.

Select C mode, you can adjust the C level value decomposition.

Y/C

0-15

Page21of27

Table of Contents

Show Quick Links

Table of Contents