Wolf Convection Steam Oven - Wolf CSO24 Installation Manual

Wolf Convection Steam Oven

Convection Steam Oven Installation
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf authorized service center
technician.
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing
the convection steam oven. Both numbers are listed on
the product rating plate located on the left oven side trim.
The oven door must be open to view the rating plate.
Refer to the illustration below.
RATING PLATE
Location of rating plate.
Wolf Convection Steam Oven
Model Number
Serial Number
wolfappliance.com/specs
CSO24
3