Additional Settings - Sonos Multi-Room Music System User Manual

7-16
from deep sleep - either from the movement sensor or from a button touch - it
will go through a restart cycle which takes several seconds.
• Motion Sensor. The motion sensor automatically wakes your Controller when
motion is detected. Use this setting to turn the motion sensor 'on', 'off', or 'off
while charging', which will disable the motion sensor only when your Control-
ler is seated in the cradle or connected to the power adapter.
• Language. Use this setting to select your language preference. When you
change your language preference, the Controller restarts.
• Turn Off Controller. Use this setting to put your Controller into deep sleep
anytime it will not be in use for an extended period of time, or when you are
transporting your Controller to another destination. This setting puts the
Controller into deep sleep mode immediately rather than waiting for the deep
sleep timer setting to be reached. The Controller cannot be turned off while it
is connected to the AC adapter or charging cradle.
• Factory Reset. Use this setting to return the Controller to its original factory
settings. This will disconnect the Controller from your Sonos Multi-Room Mu-
sic System entirely (you can add it again at any time.) This may be necessary
if the Controller gets associated to the wrong music system during setup, or if
you wish to join your Controller to another Sonos Multi-Room Music System
(for
example, if you are setting up a previously used Sonos system.)

Additional Settings

Sonos Multi-Room Music System User Guide