2-16
Music menu
Add a Sonos Controller
You should charge your new Sonos Controller when you remove it from the
packaging. Plug it into the power adapter, and then follow the Controller's on-screen
prompts to add it to your music system (you can use the Controller while it is
charging.)
For additional information about your handheld Controller, see "The Sonos®
Controller 100" on page 7-1.
Add an iPhone or iPod touch
The Sonos Controller for iPhone application turns your iPhone or iPod touch into a
full-fledged Sonos Controller. You simply need to have an iPhone or iPod touch
connected to your wireless router, and at least one ZonePlayer set up. iPhones, iPod
touches, and Sonos ZonePlayers are sold separately.
Note: To use the Sonos Controller for iPhone, your iPhone or iPod touch must
be connected to your wireless network and the Wi-Fi setting must be set to On.
If you need to make changes to your wireless connection, you can select
Settings>Wi-Fi from the Home screen on your iPhone or iPod touch. For
additional help with this step, refer to the manual that accompanied your
iPhone (http://support.apple.com/manuals.)
• During the setup process, you will be asked to press and release
the Mute and Volume Up buttons simultaneously on the Zone-
Player you are adding.
• You may release the buttons as soon as the Mute indicator
(green) and the ZonePlayer Status Indicator (white) start to
blink alternately (this takes approximately 1 second.)
• When the ZonePlayer has been successfully added to your mu-
sic system, the Mute indicator will go out and the ZonePlayer
Status indicator will change to solid white.
Sonos Multi-Room Music System User Guide