Surround Speakers; Adding Surround Speakers; Surround Settings - Sonos Wireless HiFi System Setup Manual

Sonos Setup
To separate a stereo pair:
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
Select the Sonos stereo pair you wish to separate from the Room Settings for drop-down list (the stereo pair will appear
3.
with L + R in the room name).
On the Basic tab, click Separate Stereo Pair.
4.
Click Separate.
5.

Surround Speakers

Adding surround speakers

You can easily pair two PLAY:1 or PLAY:3 products with a PLAYBAR to function as left and right surround channels in your
Sonos surround sound experience. You can either configure surround speakers during the setup process or follow the steps
below to add them later.
• Make sure the Sonos players are the same—you cannot combine a PLAY:1 and a PLAY:3 to function as surround
speakers.
• Pairing surround speakers with your PLAYBAR requires a wired connection so make sure you have a BRIDGE, BOOST or
Sonos player wired to your router with an Ethernet cable before proceeding.
• Be sure to follow the instructions below to set up your surround speakers. Do not create a room group or stereo pair as
these will not achieve the left and right surround channel functionality.
Using a handheld Sonos controller
From the Settings menu, select Room Settings.
1.
Select the room the PLAYBAR is located in.
2.
Select Add Surround Speakers.
3.
Follow the prompts to add first a left and then a right surround speaker.
4.
Using the Sonos Controller App for Mac or PC
Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
1.
Select Room Settings if it is not already highlighted on the left.
2.
From the Basic tab, select Add Surround Speakers.
3.
Follow the prompts to add first a left and then a right surround speaker.
4.

Surround settings

The default setting is determined by the calibration process. If you wish to make a change, you can follow the steps below.
Using a handheld Sonos controller
From the Settings menu, select Room Settings.
1.
21