Removing A 3.5" Hard Drive - HP DX2200 Hardware Reference Manual

Hardware Upgrades

Removing a 3.5" Hard Drive

✎
1-18
1. Turn off the computer properly through the operating system and
turn off any external devices.
2. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
3. Remove the access panel and front bezel. Refer to
Access Panel and Front Bezel."
4. Disconnect the power and data cables from the back of the hard
drive.
5. Remove the four retainer screws that secure the drive to the bay 1
then slide the drive back and out of the bay 2.
Removing a 3.5" Hard Drive
To install a hard drive, reverse the removal procedure. No guide
screws are required for drives installed in a 3.5" hard drive bay.
www.hp.com
"Removing the
Hardware Reference Guide