Serviceability Features; Warnings And Cautions - HP DX2200 Hardware Reference Manual

Hardware Upgrades

Serviceability Features

Warnings and Cautions

Å
Å
Ä
Ä
1-2
The Microtower computer includes features that make it easy to
upgrade and service. A Torx T-15 screwdriver is needed for many of
the installation procedures described in this chapter.
Before performing upgrades be sure to carefully read all of the
applicable instructions, cautions, and warnings in this guide.
WARNING: To reduce the risk of personal injury from electrical shock
and/or hot surfaces, be sure to disconnect the power cord from the wall
outlet and allow the internal system components to cool before touching.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telecommunications/telephone connectors into the
network interface controller (NIC) receptacles.
CAUTION: Static electricity can damage the electrical components of the
computer or optional equipment. Before beginning these procedures,
ensure that you are discharged of static electricity by briefly touching a
grounded metal object. See
information.
CAUTION: When the computer is plugged into an AC power source,
voltage is always applied to the system board. You must disconnect the
power cord from the power source before opening the computer to
prevent system board damage.
www.hp.com
Chapter 4, "Electrostatic Discharge" for more
Hardware Reference Guide