Activating Call Forwarding For All Calls - Siemens HiPath 8000 Operating Manual

Step by Step
Accept
Accept

Activating call forwarding for all calls

r
Use the
forwarding directly for all calls.
z You can also configure this setting via the Web interface
page 184.
Prerequisite: At least one destination phone number is
programmed
r
Press the key shown.
The pop-up menu opens:
The pop-up menu disappears after around five seconds
r
and the
or
Confirm. The
Call forwarding is activated for all calls.
If the phone is idle, the call forwarding icon
on the graphic display with the destination phone num-
ber.
Deactivating call forwarding for all calls
r
Press the lit key.
The pop-up menu opens:
The pop-up menu disappears after around five seconds
r
and the
or
Confirm. The
Call forwarding is deactivated for all calls.
function key to activate or deactivate call
page 58.
key lights up.
r
key lights up.
key goes out.
r
key goes out.
Basic functions
K
appears
61