JVC GC-PX100 Detailed User Manual page 92

Using Wi-Fi
4
Tap "ACCESS POINTS".
(Operation on this camera)
5
Tap "ADD".
(Operation on this camera)
6
Tap "SEARCH".
(Operation on this camera)
The search results appear on the camera's screen.
0
"UNABLE TO FIND THE ACCESS POINT" message appears if there
0
is no access point in the surrounding area.
7
Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
8
Register a password.
(Operation on this camera)
92
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
The password is not required if the wireless LAN router is not security
0
protected.
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Other methods, such as "Manual Registration" and "WPS PIN
0
Registration" are also available. Refer to the following link for details.
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 115)