JVC GC-PX100 Detailed User Manual page 167

7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
8
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Search the access point, and select from the list.
o
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
4
Tap "ACCESS POINTS".
(Operation on this camera)
Using Wi-Fi by Creating a QR Code
5
Tap "ADD".
(Operation on this camera)
6
Tap "SEARCH".
(Operation on this camera)
The search results appear on the camera's screen.
0
7
Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
8
Register a password.
(Operation on this camera)
Tap on the on-screen keyboard to enter characters. The character
0
changes with every tap.
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
The password is not required if the wireless LAN router is not security
0
protected.
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
167