Using Wi-Fi by Creating a QR Code
The URL for the computer to connect to appears.
0
2
Check the URL displayed on the camera screen, which starts from
"http://".
After checking the URL, tap "QUIT" to return to the previous screen.
0
3
Start Internet Explorer (web browser) on the computer and enter the
URL.
152
INDOOR MONITORING
Setting (Once setting is done, start from the "Regular
o
Operation" below)
Create a QR code.
Enter values in the required items for indoor monitoring.
o
Password: set a password to connect this camera to the device via an
0
access point. (Not more than 8 characters)
HTTP Port: Normally set to "80".
0
Display the screen for reading the QR code.
1
Tap "MENU".
(Operation on this camera)
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap "COMMON Wi-Fi SETTING".
(Operation on this camera)
4
Tap "SET FROM QR CODE".
5
Tap "EXECUTE".