JVC GC-PX100 Detailed User Manual page 164

Using Wi-Fi by Creating a QR Code
"ABC", for example, enter "A" by tapping once, "B" by tapping twice,
or "C" by tapping 3 times.
Tap "DELETE" to delete a character.
0
Tap "CANCEL" to exit.
0
Tap "A/a/1" to select character input type from upper case letter, lower
0
case letter, and number.
Tap E or F to move one space to the left or right.
0
The password is not required if the wireless LAN router is not security
0
protected.
9
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
Other methods, such as "Manual Registration" and "WPS PIN
0
Registration" are also available. Refer to the following link for details.
"Registering the Access Points of the Camera to Connect (ACCESS
POINTS)" (A p. 115)
Regular Operation
o
Sending a Notification Mail.
1
Tap "MENU".
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
3
Tap "DETECT/MAIL" (P).
4
Tap "DETECT/MAIL ATTN.".
164
5
Select "DETECT/MAIL ATTN.", then tap J.
To display the P icon, tap the e-mail address.
0
To cancel the e-mail address, press the icon one more time.
0
Up to 8 e-mail addresses can be selected.
0
6
Tap "START" (I).
7
Start making a connection.
8
DETECT/MAIL detection standby
Detection is suspended for the first 5 seconds.
0
9
DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
The "PHOTO" icon appears on the screen for about 2 seconds upon
0
detection.