JVC GC-PX100 Detailed User Manual page 150

Using Wi-Fi by Creating a QR Code
Regular Operation
o
Connecting the Smartphone to the Camera Wirelessly
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
4
Tap "START" (I).
(Operation on this camera)
5
Check the SSID and the PASS being displayed on the screen of the
camera.
6
Select the SSID in step 5 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone (or computer))
150
For details on connecting your smartphone (or computer) to a Wi-Fi
0
network, please refer to the instruction manual of the phone terminal
in use.
7
A connection is established and Q appears on the camera's screen.
Connection by Wi-Fi Protected Setup (WPS)
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
3
Tap the "DIRECT MONITORING" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
4
Tap "START" (I).
(Operation on this camera)