Temperature Span - Hunter 44259 Owner's Manual

B93Q book English p. 16-32 2/7/03 10:05 AM Page 11
Other Features

Temperature Span

Your thermostat is pre-programmed at the
factory to cycle when the temperature rises
1° above or 1° below the temperature
Backlighting
Press LIGHT
Your thermostat comes with an electrolumi-
nescent lamp for easy viewing of the display
in the dark. To activate press the "light"
button between the up and down arrow keys.
28-29
setting to provide maximum comfort. It
cannot be changed.
The display will remain backlit for
approximately five (5) seconds. If another
button is pushed, the five second timer will
reset, and the light will turn off five seconds
after the last button is pressed.