Temperature Span; Backlighting - Hunter 44300 Owner's Manual

Temperature Span

Your thermostat is pre-programmed at the
factory to cycle when the temperature rises

Backlighting

Press
Your thermostat comes with an electrolumi-
nescent lamp for easy viewing of the display
in the dark. To activate press the "light"
button between the up and down arrow keys.
12/24 Hour Clock
The 12/24 hour switch is located on the
printed circuit board inside the thermostat.
(Model 44350 only) Pressing the 12/24
button alternates the clock between 12 or
24 hour (military) mode.
Get user manuals: See SafeManuals.com
Other Features
(Model 44350 only)
LIGHT
1° above or 1° below the temperature
setting. It cannot be changed.
The display will remain backlit for
approximately five (5) seconds. If another
button is pushed, the five second timer will
reset, and the light will turn off five seconds
after the last button is pressed.
NOTE: Move system selector slide switch
to "OFF" before removing thermostat
from wall and changing 12/24 hour clock
mode.
30-31