Remote And Indoor Temperatures Window; Weather Forecast Window; Maximum And Minimum Readings; Lost Communication - Honeywell PCR426W User Manual

REMOTE AND INDOOR TEMPERAT URES WINDOW
The temperature window default display shows the indoor and remote
temperature information (remote temperature is on the top, and indoor
temperature is on the bottom line) .The IN icon indicates that the unit is
displaying the indoor readings.
The remote temperature for channel two and three can be recalled by
pressing CHANNEL button.
The wave (reception) icon is located above the remote channel number
and indicates the reception status from the remote sensor.
The following three types of reception status may be displayed:
The unit is in searching mode.
Temperature reading is securely registered.
No signal is detected.
NOTE: If the indoor or remote temperature goes above or below
operating specification range, the main display will show dashes - - -
- - -
11

WEATHER FORECAST WINDOW

The Weather Forecaster is capable of detecting atmospheric pressure
changes. Based on collected data, it forecasts the weather for the next 12
to 24 hours.
NOTE: The weather forecast accuracy is approximat ely 70%.
Display shows forecasted, not current conditions. The SUNNY icon
indicates clear weat her, even when displayed during the night-time.

MAXIMUM AND MINIMUM READINGS

The maximum and minimum r ecord of the indoor and remote
temperatures will be automatically stored in the memory of the main unit.
To display the minimum or maximum temperature reading press
CHANNEL and DOWN ( ) buttons simultaneously.
If no button is pressed for the next 15 seconds, the unit will return to the
current temperature display.
To clear the memory, press and hold CHANNEL button for two seconds
and all previously stored readings will be erased.

LOST COMMUNICATION

If the main unit display line for the remote sensor reading goes blank,
11
12