Using The Command/Response Table - Extron electronics MMX 32 VGA A User Manual

Remote Control, cont'd

Using the command/response table

The SIS command/response table begins on the next page.
Lower case letters are acceptable in the command field only
where indicated. Symbols are used throughout the table to
represent variables in the command/response fields. Symbol
definitions and an ASCII-to-hexadecimal (HEX) conversion
table are provided below. Command and response examples
are shown throughout the table.
Symbol definitions
= Carriage return/line feed
= Carriage return (no line feed)
= W
Esc
= Input number
X1
= Input number (for tie)
X2
= Output number1 or 2
X3
= 0 or 1
X9
X19 = Controller software version number to second decimal
place
= Mute
X20
ASCII to HEX Conversion Table
Space
3-4 MMX 32 VGA A • Remote Control
1 – 3
0 – 3
0 = disconnected
0 = off
1 = on
0 = no mute
1 = video mute
2 = audio mute
3 = video and audio mute
MMX 32 VGA A • Remote Control 3-5