Honda 2006 Odyssey Owner's Manual page 374

Changing a Flat Tire
19. Adjust the seat-back of the third
seat to an upright position. Install
the bracket mounting bolt on the
attachment point as shown, and
tighten the bolt. Make sure the
bracket is securely locked.
370
BRACKET
TIRE MOUNTING WING BOLT
20. Install the flat tire on the bracket
with the inside of the wheel facing
toward you. Install the tire
mounting wing bolt to the bracket
through one of the five wheel nut
holes as shown. Poke a hole in the
vinyl bag as needed. Secure the
flat tire by tightening the wing bolt.
21. Store the jack in its holder. To
store the jack, align the locator
stud in the holder with the hole in
the jack base. Turn the jack's end
bracket clockwise to lock it in
place. Store the tools in the
holders on the back of the jack
storage cover.
22. Store the plastic screw in a
noticeable place.
Make sure to reinstall the plastic
screw after the flat tire is repaired
and installed on the vehicle.
23. On LX model
Store the wheel cover in the spare
tire storage area.