Honda 2006 Odyssey Owner's Manual page 373

13. Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
Lower the vehicle to the ground,
14.
and remove the jack.
15. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
94 lbf·ft (127 N·m , 13 kgf·m)
16. Put the flat tire in the supplied
vinyl bag. This bag is in the jack
storage area.
Changing a Flat Tire
BRACKET MOUNTING BOLT
BRACKET
17. Remove the bracket from the jack
storage area by unscrewing the
bracket mounting bolt.
18. You will find a u-shaped slit on the
carpet behind the seat bottom of
the third seat. Pull up the carpet at
the slit, and remove the plastic
screw with a coin.
CONTINUED
369