Honda 2006 Odyssey Owner's Manual page 356

Wiper Blades
BLADE
REINFORCEMENT
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
5. Front Wiper :
Slide the new wiper blade into the
holder until the tabs lock.
352
Rear Wiper :
Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
Insert both ends of the blade into the
holder. Make sure they are secure.
6. Install the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm against the
windshield.
Front windshield: Lower the
passenger's side first, then the
driver's side.