Eco-Throttle Switch; Parallel Operation Outlets - Honda EU1000i Owner's Manual

TM
Eco-Throttle
The Eco-Throttle
loads are turned off or disconnected. When appliances are turned on or
reconnected, the engine returns to the proper speed to power the
electrical load.
If high electrical loads are connected simultaneously, turn the 
Eco-Throttle switch to the OFF position to reduce voltage changes.
ON:
Recommended to minimize fuel consumption and further reduce
noise levels when less than a full load is applied to the
generator.
OFF: The Eco-Throttle system does not operate.
When using the DC output, turn the Eco-Throttle switch to the
OFF position.

Parallel Operation Outlets

These outlets are used for connecting two EU1000i generators for
parallel operation (see page 30). A Honda-approved parallel operation
cable (optional equipment) is required for parallel operation. This cable
can be purchased from an authorized Honda generator dealer.
Switch
TM
system automatically reduces engine speed when
ON
PARALLEL OPERATION OUTLETS
CONTROLS & FEATURES

ECO-THROTTLE SWITCH

OFF
15