Appendix B • Reference InformAtion; Specifications - Extron electronics Matrix 12800 Wideband video User Manual

Reference Information

Specifications

Video— wideband/video BMEs
Routing ........................................... 32 x 16 or larger matrix up to 128 x 128, depending on the configuration
Gain ................................................. Unity
Bandwidth
Wideband models ............. 375 MHz (-3 dB), fully loaded
0 - 10 MHz .................. No more than +0.1 dB to -0.1 dB
0 - 130 MHz ................ No more than +4 dB to -.25 dB
Video models ..................... 150 MHz (-3 dB), fully loaded
0 - 10 MHz .................. No more than +0.1 dB to -0.1 dB
0 - 130 MHz ................ No more than +0.5 dB to -0.5 dB
Phase between I/Os ...................... <1.28° at 3.58 MHz
Differential phase error ................ 0.1%, 3.58 to 4.43 MHz
Differential gain error ................... 0.1°, 3.58 to 4.43 MHz
Max. propagation of delay ........... 5 ns typical (±1 ns)
Crosstalk ......................................... -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed ............................ 200 ns (max.)
Video input— wideband/video BMEs
Number/signal type
Wideband models ............. Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs,
Video models ..................... Up to 128 (usable quantity varies with configuration) component video,
Connectors ..................................... 128 female BNC (usable quantity varies with model)
Nominal levels ............................... 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ Analog: 0.5 V to 1.5 Vp-p with no offset
Impedance ...................................... 75 ohms
Return loss ...................................... <-30 dB @ 5 MHz
Video output— wideband/video BMEs
Number/signal type ..................... Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs,
Connectors ..................................... 128 female BNC (usable quantity varies with model)
Nominal levels ............................... 1 Vp-p for Y of component video and S-video, and for composite video
Maximum level .............................. 2 Vp-p
Impedance ...................................... 75 ohms
Return loss ...................................... -25 dB to input section @ up to 50 MHz
DC offset ......................................... ±10 mV typical with input at 0 offset
Switching type ............................... Triple-Action
Slew rate ......................................... >200 V/ms
Sync— sync BME
Input and output types ................ Software configurable for RGBHV or RGBS
Sync connectors ............................. Up to 128 female BNC (usable quantity varies with configuration)
Input level ...................................... 0.5 V to 5 Vp-p (4 Vp-p nominal)
Output level ................................... 5 Vp-p
Gain ................................................. AGC to TTL: 4.0 V to 5.0 Vp-p
B-2 Matrix 12800 Switchers • Reference Information
component video, S-video, composite video
S-video, composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
component video, S-video, composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
™