Cary Audio Design Cinema 11p Owner's Manual page 11

CONTROLS AND DISPLAYS
Channel 7 Channel 8
+ - +
BALANCED INPUT RCA BALANCED INPUT
- -
+ +
Channel 1
1 4
BALANCED INPUTS
4.
Accepts balanced signals from the associated surround sound processor with
balanced outputs.
The pin assignments of these XLR-type female input are:
2
1
3
Refer to the operating manuals of your balanced-output surround sound
processor to verify that the pin assignments of their output connectors
correspond to the Cinema 11p. If not, wire the cable so that the appropriate
input pin connects to the equivalent output pin.
5. SINGLE-ENDED INPUTS
accepts (RCA) inputs from surround sound processor. These signals are
converted to balanced signals upon entering the chassis and processed as balanced
signals thereafter. One RCA connector is available for each channel.
6.
INPUT SWITCH
Use this switch to select the input use the BALANCED inputs or SINGLE-ENDED
inputs.
Channel 9
Channel 10
- + -
BALANCED
RCA BALANCED INPUT RCA
+ - +
Channel 2 Channel 3
6
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Channel 11 Channel 12
+ - + -
INPUT RCA BALANCED
BALANCED INPUT RCA
-
+ - +
Channel 5
Channel 4
5
10
AC POWER
+ - [ ] 117V 50Hz/60Hz
Cary Audio Design
[ ] 220V 50Hz/60Hz
Apex, NC, USA
INPUT RCA
Trigger
Input
-
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Channel 6
3
2