Rear Panel Connections - Extron electronics USB HUB4 AAP User Manual

Installation
Installation Overview
1
2
3
N Choose one of these two methods to connect the HUB4 to the host computer. Do
4
5
6
7

Rear Panel Connections

POWER
12V
500mA
IN
USB IN
WIRE COLOR
G W R
D+ D- +V
+V D- D+ +V D- D+
3
USB HUB4 AAP rear panel
2-2 USB HUB4 Series • Installation
If using an electrical box or a mounting bracket, install it in the wall or
furniture. See "Wall or furniture
Mount the USB HUB4 into an appropriate sized AAP or MAAP
mounting frame, rack space frame, or other Extron architectural product.
See "Mounting the hub to a mounting
procedure.
Connect the USB HUB4 to the host computer in either of the following ways:
• Using the Type mini B USB connector: Connect a type A-to-Type mini B
cable (provided) to the USB mini B connector on the HUB4 rear panel.
• Using the green captive screw USB In port: Remove the Type B or
Type mini B terminator from a Type A-to-B or Type A-to-mini B USB
cable and insert the cable's wires into the 5-pole USB In connector. This
method may be necessary if space is limited. (See
captive screw USB
not connect the host computer to both HUB4 connectors at the same time.
(Optional) If the USB peripheral devices that are connected to the HUB4
require more power than the hub can provide, wire an optional Extron
PS 1210 C external 1 A, 12 VDC power supply (part #70-775-01) to the
Power In ports on the rear panel. (See
supply", later in this chapter.)
(Optional) If using an electrical box, mount the HUB4 and mounting frame
to it. (See "Mounting the hub to a wall
using a mounting bracket, this step is not needed.
Connect your peripheral USB devices to the front panel USB Type A
connectors.
Power on the host PC and, if applicable, the desktop power supply.
Check the front panel power indicator LED
receiving power.
1
12VDC
POWER
IN IN OUT OUT
OUT
USB IN
WIRE COLOR WIRE COLOR
R R W G B W G B
B
S S
2
mounting", later in this chapter.
frame", later in this chapter, for the
connector", later in this chapter.)
"Connecting the external power
box", later in this chapter.) If you are
POWER
12V
500mA
USB HUB4 MAAP rear panel
"Connecting to the
to verify that the HUB4 is
1
12VDC
POWER
IN IN IN OUT OUT
OUT
USB IN
USB IN
WIRE COLOR WIRE COLOR
WIRE COLOR
R R W G B W G B
G W R B
D+ D- +V
+V D- D+ +V D- D+
S S
3
2