Recalling the Bluetooth Audio Mode
Press VSOURCE to select the BLUETOOTH Audio mode.
Selecting the desired Song
1
Press .
Returns the beginning of the song being played back.
2
Press .
Forwards the next song.
Pressing and holding or will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.
Selecting the desired Group (Folder)
Press 1 or 2 to select the desired Group (Folder)
Pressing and holding 1 or 2 will change folders
continuously.
Note
• This function may not available depending on the paired device.
Pausing
Press .
A playback stops. Pressing again will resume a playback.
Searching for a desired song
Artist name, album name, etc., may be searched and displayed during
playback or pause.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3
Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4
Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the connected device.
• The pause mode may be cancelled after the search.
• This function may not available depending on the paired device.
USB Memory (optional)
Rotary encoder
/ENTER
/ II
SOURCE
Note
• You can connect Nokia (Symbian
the music stored on your phone.
Connecting the USB Memory (optional)
If a USB Memory device is connected to the unit, MP3/WMA/AAC files
can be played back.
Playback
1
Press VSOURCE to select the USB mode.
2
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
3
To pause playback, press .
Pressing again will resume playback.
Notes
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/song name is
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
• If text information is not compatible with this unit, the display is blank.
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• Press VIEW to switch the display. For details, refer to "Displaying the
Text" on page 23.
VIEW
5
1
2
4
Preset buttons
(1 through 6)
™
) phone via USB port to play back
37
-EN