Sansui SLEDVD197 Owner's Manual page 34

Connections to other equipment
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
To PC/DVI AUDIO IN
Rear and left of the unit
NOTE:
•
When using HDMI/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the
image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable
or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To
receive the picture you must change the output resolution on the external component.
• Should you require further instruction, please contact the manufacturer of the external component.
EN 34
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
To HDMI/DVI IN
HDMI cable (type A connector)
(not supplied)
To DVI output
DVI device
or
HDMI device
To HDMI output