Overview; Introduction; Module Description; Option Numbers - HP 7500 PCI Installation Manual

1 Overview

Introduction

This chapter provides a brief overview of the ATI RADEON 7500 PCI graphics controller.

Module Description

The ATI RADEON 7500 PCI graphics controller/accelerator module is a single expansion-slot 32 bit,
66/33 MHz Universal PCI option that provides 2D and 3D graphics acceleration for supported HP
systems running HP OpenVMS I64 and 2D for supported HP-UX systems
The ATI RADEON 7500 graphic card is based on ATI's RV200 graphics chip.
Table 1-1

Option Numbers

Option Description
AB551A ATI RADEON 7500 PCI graphics controller with 64 MB of DDR SDRAM memory.
For current minimum operating system and firmware revision information supported for the ATI
RADEON 7500 graphics controllers, refer to the system QuickSpecs located at http://www.hp.com.
Chapter 1 1