Foot Platform Height Adjustment; Foot Platform Depth Adjustment; Foot Platform Angle Adjustment; Swing-Away Footrests (Optional) - Pride Jazzy 1122 Owner's Manual

V . C O M F O R T

Foot Platform Height Adjustment

The foot platform height is easily adjusted to one of six different
heights in 1-in. increments.
To raise or lower the foot platform:
1. Remove the nuts and bolts from the foot platform bracket. See
figure 17.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the nuts and bolts to the foot platform bracket and
tighten.

Foot Platform Depth Adjustment

To adjust the foot platform depth:
1. Remove the nuts and bolts from the foot platform bracket.
See figure 17
2. Move the foot platform in or out to the desired depth.
3. Reinstall the nuts and bolts to the foot platform bracket and
tighten.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key. See
figure 18.
To adjust the foot platform angle:
1. Locate the setscrew on the underside of the foot platform.
2. Turn the setscrew clockwise to raise the front of the foot plat-
form.
3. Turn the setscrew counterclockwise to lower the front of the foot plat-
form.

Swing-away Footrests (Optional)

Swing-away footrests (SFRs) are an option. They enable you to
swing the footrest to the side before transferring from your power
chair.
To swing the footrests:
1. Push in the SFR release lever. See figure 19.
2. Swing the footrest off to the side.
To adjust the SFR length:
1. Remove the two screws from the side of each leg rest exten-
sion. See figure 19.
2. Slide the leg rest in or out to the desired length.
3. Reinstall the two screws on each leg rest extension.
24
A D J U S T M E N T S
www.pridemobility.com
BALL DETENT
PIN
Figure 17. Foot Platform Height Adjustment
SETSCREW
Figure 18. Foot Platform Angle Adjustment
SFR RELEASE
LEVER
FOOTREST
EXTENSION
Figure 19. Swing-Away Footrests
FOOT PLATFORM
BRACKET NUTS AND
BOLTS
ADJUSTMENT
SCREWS
Jazzy 1122