Pairing Your Bluetooth Usb Adapter; Initial Pairing; Re-Pair Bluetooth Usb Adapter To Headset; Auto Connect - Plantronics Voyager Legend UC B235-M User Manual

Pairing your Bluetooth USB adapter

Initial pairing

Re-Pair Bluetooth USB
Adapter to headset

Auto Connect

Your Bluetooth USB adapter comes pre-paired to your Voyager Legend headset.
In the event that your headset and Bluetooth USB adapter are not paired or become unpaired
do the following:
1 Remove the Bluetooth USB adapter.
2 Power on your headset then choose:
• Tap the Voice button and say "Pair Mode."
• Press and hold the Call button
3 Insert Bluetooth USB adapter directly into your PC USB port. Once successfully paired, the LEDs
stop flashing red and blue and you hear "PC connected."
4 Headset will exit pairing mode.
Your headset will automatically connect to paired devices such as your mobile phone and
Bluetooth USB Adapter when the headset is on and within range. Voice prompts will also
prompt you when you are out of range of devices.
until you hear "Pairing."
15