Plantronics Blackwire C420 Quick Setup Manual

Blackwire C420
™
Welcome:
Using a Plantronics Blackwire headset for PC
calls will deliver a simpler, more comfortable
and better sounding audio experience than
you could get using just your computer's
internal microphone and speaker.
A
B
C
Control Functions:
A. Mute Microphone
B. Volume Adjust
C. Call Answer/End
Blackwire C420 Key Features:

Wideband for best PC audio telephony

Folds flat and tucks into carrying case for
use on the go

Dynamic EQ stereo automatically adjusts
for voice and multimedia use

Noise-canceling microphone filters out
background noise
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire and C420 are trademarks or registered trademarks of Plantronics, Inc. Avaya one-X is a trademark of Avaya Inc. Published 01.11
Quick Setup Guide
™
Getting started:
The Plantronics Blackwire headset is ready to use with
your computer and Avaya one-X® Communicator.
1. Connect your headset to the computer. If this
is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Avaya one-X Communicator to always
route call audio to the headset:
3. Click the Menu icon in the Avaya one-X
Communicator main screen.
4. Select Settings, then General Settings.
5. Next choose Audio.
6. Click Audio Tuning Wizard.
7. Select your Plantronics headset as the default
device for both Playback and Recording. Click
Next.
8. In these next screens, you can test and adjust
volume, recording level, and identify
background noise for optimal noise
cancellation.
9. When adjustments are complete, select
Finish.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you will
need to make these changes again to set behavior for that
USB port.
3
4
5
6
6
7
6
7