Install The Bike Mount - Polar Electro CS500 Getting Started Manual

3. INSTALL THE BIKE MOUNT

You can install the bike mount on the stem or left-
or right-hand side of the handlebar.
1. Thread two cable ties through the passages of
the bike mount. If you install the bike mount on
the handlebar, thread the cable ties to the
opposite direction.
2. Insert the rubber part into the bike mount.
Make sure that it is firmly in its nest.
3. Place the rubber part and the bike mount on
the stem/handlebar and adjust the cable ties
around the stem/handlebar. Secure the bike
mount firmly. Cut off excess cable ties.
For a video tutorial, go to
http://www.polar.fi/en/support/video_tutorials.
Install the Bike Mount
ENGLISH
13