Figure 35 - Top Case And Display Removal - HP OmniBook 800CS/CT Service Manual

Figure 35 - Top Case and Display Removal

8. To separate the Display from the Top Case, thread the Display Flex Cable(s) through the
opening of the Top Case.
Replacement Procedure
1. If the replacement Display arrived without an Intel Inside sticker, one will need to be placed
equidistant between the edges of the Display. For the F1360 OmniBooks, the sticker is
placed about 7mm above the hinge. For F1171 - F1175 OmniBooks, the sticker is placed
about 10mm above the hinge. See Figure 36 for examples.
65