Figure 33 - Keyboard Support Plate Screws - HP OmniBook 800CS/CT Service Manual

Assembly can then be removed with the CPU still attached to the underside of the
Keyboard Support Plate. This avoids causing damage to the CPU or Logic PCA.
M2.0x0.4x11.5
qty 2
1.5-3.0 in-lb
(p/n 0515-2920)
M2.0x0.4x3.5
qty 1
1.5-3.0 in-lb
(p/n 0515-2921)

Figure 33 - Keyboard Support Plate Screws

6. Close the cover and gently pry the Top Case and Display Assembly from the Bottom Case
along the case seam. See Figure 34 on page 64 and Figure 35 on page 65. Take caution
of the Display Flex Cable(s) still connected to the Bottom Case, as it is the only
component now holding the Top Case and Display Assembly to the Bottom Case; do
not lay the Top Case and Display Assembly down at this point.
To avoid damage to the display cables, take care not to pull the cables out
C
:
AUTION
of the connector while prying open the case.
M2.0x0.4x4.5
qty 2
1.5-3.0 in-lb
(p/n 0515-2853)
F1360 only F1171 - F1175
63