Hard Drive - HP MINI 110 110 Maintenance And Service Manual

Hard drive

NOTE: Each hard drive spare part kit includes a cable adapter, bracket, and four rubber isolators.
Description
Hard drive:
250-GB, 5400-RPM
320–GB, 5400–RPM
Before removing a hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the hard drive:
1. Lift up the vinyl cover to expose the hard drive.
2. Using a small Phillips screwdriver, remove the 4 hard drive mounting screws.
Battery on page 38).
Battery on page 38).
Component replacement procedures
Spare part
number
608763–001
608764–001
41