Installing Windvd Creator - HP Notebook Series Hardware And Software Manual

Installing WinDVD Creator

If WinDVD Creator is included with your notebook, it is provided
on an InterVideo WinDVD Creator CD.
WinDVD Creator can be installed only from a DVD/CD-RW
Combo Drive or a DVD+RW/R and CD-RW Combo Drive.
If your system does not include either of these drives, you
cannot install WinDVD Creator from an InterVideo WinDVD
Creator CD.
To install WinDVD Creator:
1. Connect the notebook to reliable external power.
2. Close any open applications.
3. Insert the InterVideo WinDVD Creator CD into the Combo
Drive. After several seconds, an installation wizard is
displayed.
If the installation wizard does not display, your AutoPlay
settings might have been modified. To proceed with the
WinDVD installation, select Start > Run. In the Open text
field, type:
designation), and then select OK.
4. When the installation wizard is displayed, follow the
installation instructions on the screen.
For more information about AutoPlay settings, see the
AutoPlay Preferences"
Hardware and Software Guide
(where x is your Combo Drive
x:\setup.exe
section earlier in this chapter.
Multimedia
"Setting
4–17