Entering Hp Administrator Passwords - HP Notebook Series Hardware And Software Manual

3. Open the Setup utility by turning on or restarting the
notebook. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > Administrator
Password, and then press
5. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are set when you exit the Setup utility and take
effect when the notebook restarts.

Entering HP Administrator Passwords

At the Enter SETUP Password prompt, type your HP
administrator password with the same keys you used to set the
password, and then press
enter the HP administrator password, you must restart the
notebook and try again.
Hardware and Software Guide
f10
To set an HP administrator password, type your password
in the Enter New Password and Confirm New
Password fields, and then press
To change an HP administrator password, type your
current password in the Enter Current Password field,
type the new password in the Enter New Password and
Confirm New Password fields, and then press
To delete an HP administrator password, type your current
password in the Enter Password field, press
and then press
while Setup message is displayed in the
enter.
f10.
After 3 unsuccessful attempts to
enter.
enter.
enter
Security
enter.
3 times,
f10,
6–9