Replacing A Battery Pack - HP Notebook Series Hardware And Software Manual

Replacing a Battery Pack

Ä
CAUTION: To prevent loss of work when removing a battery pack that
is the only power source, shut down the notebook or initiate hibernation
before removing the battery pack. (If you initiate hibernation, do not
begin the following procedure until the power/standby lights are turned
off, indicating that hibernation is complete.)
Removing a Battery Pack
Although battery packs vary by model, the removal procedure is
the same for all models.
To remove a battery pack:
1. Turn the notebook upside down.
2. Slide the battery release latch 1 to release the battery pack.
3. Tilt the battery pack 2 and pull it out of the battery bay 3.
Hardware and Software Guide
Power
3–25