2. Disconnect the Bluetooth module cable 1 from the
system board.
✎
The Bluetooth module cable is included with the Bluetooth
module spare part kit and is also included in the Cable Kit,
spare part number 434677-001.
3. Route the Bluetooth module cable 2 under the system board.
4. Remove the two silver Phillips PM2.0×3.0 screws 3 that
secure the Bluetooth module to the base enclosure.
5. Remove the Bluetooth module 4.
Removing the Bluetooth Module
Reverse the above procedure to install the Bluetooth module.
Maintenance and Service Guide
Removal and Replacement Procedures
5–59