Removal and Replacement Procedures
Wireless antenna transceivers and cables
24. If it is necessary to replace the wireless antenna transceivers
and cables, remove the two Phillips PM2.0×4.0 screws 1 that
secure each transceiver to the display enclosure.
25. Remove the wireless antenna cables from the clips 2 built
into the display enclosure.
26. Detach the wireless antenna transceivers 3 from the
display enclosure.
27. Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
5–44
Display Assembly Subcomponents
Spare Part Number Information
Maintenance and Service Guide
432966-001