Edit A Route Name; Edit Route Waypoints - Lowrance LMS-527cDF iGPS Installation And Operation Instructions Manual

Edit a Route Name

1. From the
N
| |↓ to
MENU MENU
2. Press ↓ to route name|
3. Press ↑ or ↓ to change the first character, then press → to move the
cursor to the next character and repeat until the name is correct, then
press . Return to the previous page by pressing
ENT

Edit Route Waypoints

You can edit the route by adding and removing waypoints.
1. From the
N
| |↓ to
MENU MENU
2. Press ↓ to route name|
lect a waypoint and press
3. Use ↓ ↑ to select a command from the Edit Route Waypoints menu
and press
ENT
by clicking on a map location with the cursor. Add Waypoint calls up
the Waypoint List so you can insert a waypoint from the list. Remove
Waypoint will delete the waypoint from the route. View Waypoint will
show you where the selected waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select "(End of
route)" before adding them.
, press
P
AVIGATION AGE
R P
OUTE LANNING
ENT
, press
P
AVIGATION AGE
R P
OUTE LANNING
ENT
ENT
Edit Route Waypoints menu.
. Add From Map lets you insert a waypoint in the route
|
MENU ENT
| .
ENT
| .
ENT
|
MENU ENT
| .
ENT
|↓ to
R W
OUTE
.
141
or from the
M
repeatedly.
EXIT
or from the
M
. Use ↓ ↑ to se-
L
AYPOINTS IST
press
P
AP AGE
press
P
AP AGE