Table of Contents
Advertisement
DESCRIPTION
On / Off (long press)
LEDs
You can move the sound between the Konftel 55W and the phone during a call by
pressing the button (
With a computer connection, the LEDs first light up when a communication program that
uses the microphone starts.
With a Bluetooth connection, the blue LEDs first light up when a call is connected. Since
the connection allows communication in addition to the sound, a phone call can be initi-
ated from the Konftel 55W keypad.
Mute button
Press the button
a call.
The LEDs show a steady red light and two buttons are displayed.
Press the
button if you also want to turn the speaker off.
The LEDs flash red.
Note that the buttons on the screen disappear after 5 seconds or if you touch the
screen outside the buttons.
Press
once again (the actual button on the right or the button on the screen) to turn
the microphone (and speaker) on.
The LEDs show a steady blue light.
Power save mode
The Konftel 55W has several power save mode levels. After five minutes, the background
lighting fades and after 15 minutes the image on the screen is replaced by a clock. Less
time if running on battery power.
Switching off
Hold down the button
Confirm that you want to switch off the Konftel 55W by pressing
or
) on the Konftel 55W.
(the actual button on the right) to turn the microphone off during
(the actual button on the left) for three seconds.
5
Mute (microphone off / speaker off)
.
Advertisement
Table of Contents
