Checking Tire Pressures; Seat Adjustment - Snapper 5900861 Operator's Manual

Check Tire Pressures
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note that these
pressures may differ slightly from the "Max Inflation"
stamped on the side-wall of the tires. The pressures shown
provide proper traction, improve cut quality, and extend tire
life.
Tire
Front
Rear

Seat Adjustment

See Figure 4. The seat can be adjusted forward and
backward. Move the lever towards the left, position the
seat as desired, and release the lever to lock the seat into
position.
Seat Adjustment (Suspension Seat)
See Figure 5. In addition to the forward and backward seat
adjustment, models equipped with a suspension seat can be
adjusted for lumbar support, suspension and back angle.
Forward and Backward Adjustment:
Move the forward / backward seat adjustment lever (A,
Figure 5) away from the seat, position the seat as desired,
and release the lever to lock the seat into position.
Lumbar Adjustment:
Turn the lumbar adjustment knob (B) until the desired
amount of lumbar is achieved.
Back Angle Adjustment:
Turn the back angle adjustment knob (C) until the desired
amount of back angle is achieved.
Suspension Adjustment:
Turn the suspension adjustment knob (D) until the display
scale has a reading that matches the weight of the operator.
Pressure
25 psi (1,72 bar)
15 psi (1,03 bar)
Figure 3. Checking Tire Pressure
A
Figure 4. Seat Adjustment
A. Seat Adjustment Lever
C
Figure 5. Suspension Seat Adjustment
A. Forward / Backward Seat Adjustment Lever
B. Lumbar Adjustment Knob
C. Back Angle Adjustment Knob
D. Suspension Adjustment Knob
Operation
B
A
D
17