Gas Burners - Zanussi ZCG551 User Manual

Dimension
B
C
D
E
F
Levelling
Use small feet on the bottom of appliance to set
same level of cooker top surface with other sur-
faces
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.

Gas burners

BURNER
Auxiliary burner
Semi-rapid burner
Rapid burner
Grill
Top Oven
Main Oven
Gas Connection
Use a flexible pipe in compliance with the regu-
lation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Only a qualified and competent
person must do the gas installation.
www.zanussi.com
mm
150
2
400
50
less than 400
NORMAL POWER
Before you install stability chain, adjust the
appliance to the correct height.
Measure down 180 mm from the appliance top
surface, then measure right 30 mm (See pic-
ture). Mark the position of the wall and this gives
anchor point for the stability chain.
Warning! These instructions are only valid
in the countries whose symbols appear on
this booklet's cover.
Gas Category
Gas Supply
kW inj. 100/mm
1,0
1,9
2,9
2,7
1,9
1,9
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in the
fuse box. Close the primary valve of the
gas supply.
180 mm
30 mm
I2H
G20 (2H) 20mbar
NATURAL GAS
Btu/h
70 3412
96 6483
119 10236
120 9212
99 6483
99 6483
21