Answering A Call; Ending A Call - Cisco 7940 User Manual

Chapter 3 Using the Cisco IP Phone 7940/7960
•
•
•
•
•
•
You can also place calls using the following techniques:.
•
Placing a Call Using an E-mail Address
If the network administrator configures the Cisco IP Phone 7940/7960 to use an e-mail address instead
of a phone number, you can call the phone using an e-mail address.
Perform the following steps to place a call using an e-mail address:
Lift the handset from the earpiece rest, press a line button, press the SPEAKER button, or press the
Step 1
NewCall softkey.
Press the URL softkey.
Step 2
Spell the e-mail address by pressing the numbers that represent the letters in the e-mail address.
Step 3
Depending on the letter, you might need to press the number button on the dialing pad one or more times
to scroll through the list of displayed characters until you highlight the correct character.
Continue selecting characters until the entire e-mail address is spelled correctly.
Press the pound (#) key or the Dial softkey to place the call immediately. (If you do not press a key, the
Step 4
call eventually dials automatically.)

Answering a Call

You can answer a call using the handset, headset, or speakerphone.
•
•
•

Ending a Call

To end a call:
•
OL-1365-01
Lift the handset from the earpiece rest and enter the number using the dial pad to enter the digits.
Press a line button and dial the number using the dial pad to enter the digits.
Press the NewCall softkey and dial the number using the dial pad to enter the digits.
Press the Redial softkey to dial the last called number.
If using a headset, press the HEADSET button and dial the number using the dial pad to enter the
digits.
To use the speakerphone, press the SPEAKER button and dial the number using the dial pad to enter
the digits.
You can press the pound (#) key or press the Dial softkey to place the call immediately. Depending
on how your system administrator has implemented this feature, you might not need to press these
keys to place a call immediately. Contact your system administrator for additional information.
To use the handset, lift the handset from the earpiece rest.
To use a headset, press the HEADSET button, and press the line button of the incoming call.
To use the speakerphone, press the Answer softkey or the SPEAKER button.
If using the handset, put the handset on the earpiece rest.
Cisco SIP IP Phone Model 7940/7960 User Guide
Making Telephone Calls
3-5