Turning Power On And Off; Initial System Start-Up - Alpine 3DE-7886S Owner's Manual

1
1
1
16
1
PWR
INTLZ
Basic Operation

Initial System Start-Up

Immediately after installing or applying power to
the unit, it should be initialized. To do this, first,
remove the detachable front panel. Behind the
front panel, to the right of the connector, is a
small hole. Using a pencil or other pointed
object, press the red reset button mounted
behind this hole to complete the initialization
procedure.

Turning Power On and Off

Press the PWR button to turn on the unit.
Note: The unit can be turned on by pressing
any other button except the eject ( h )
and CLK buttons.
The volume level gradually increases to the
previous level you were listening to before the
unit was turned off.
Press the PWR button again to turn off the unit.
Note: When Power is turned on for the very first
time, the A.S.U. (Automatic Set-Up)
function will be initiated automatically.
See A.S.U. description on page 18.
English