Using the Master Reset Button
Your MiFi device comes with a master reset button that allows you to return it to its factory default
state.
The master reset button is recessed in a hole on the back of the device. You need a paperclip or
similar object to push the button.
➊
Make sure your MiFi device is powered on.
➋
Locate the master reset button on the back of the device next to the regulatory label.
➌
Insert a paper clip into the hole and hold the button down for fifteen (15) seconds or until
the LED turns red.
Your list of wireless networks now shows the original default network when you first
configured your device.
➍
Connect to your MiFi device again and re-configure it. Your pre-configured profile
information stays the same, but for any custom profiles you have to enter your APN and
other information again.
65